Fabric Frame Graphic Starlight (SEG) 180g/m2 Latex Print 71,5 x 70 cm
Technical specification of product Fabric Frame Graphic Starlight (SEG) 180g/m2 Latex Print 71,5 x 70 cm
|Version||Single sided use|
|Product width (mm)||715|
|Product height (mm)||700|
|Product depth (mm)||1.5|
Fabric Frame Graphic Latex
The Fabric Frame Graphic is 100% Polyester (PES) woven fabric material of 180 g/m2, coated with resin. The Starlight material is B1 fire rated, which makes it an ideal and safe material to use at exhibitions and events.
Silicone Edge Graphic (SEG)
The Fabric Frame Graphic Latex is finished with a silicone strip edge sewn around the edges, which makes it easy for you to insert the graphic into the fabric frame extrusions. Create a stunning visual impact with a nice, tight graphic and a frameless appearance, with the tensioned fabric prints with silicone edging.
Suitable for Fabric Frame Graphics up to 100 x 250 cm
The Fabric Frame Graphic Latex is suitable for all Fabric Frames up to sizes 100 x 250 cm. The Starlight material with latex printing is recommended to use if you have dark or black coloured graphics, to create a supérieur black look.
Latex Printing Method
Choose an economic option with the Latex printing method on the Starlight 100% PES printing material. The print is layered on the fabric and not inside the fibres, allowing an excellent sharp print result. After using your Starlight Latex print, make sure to roll it back on a tube, to avoid any cracks or damages on the print.